TREK-753 User Manual
12
2.3
Running the BIOS Setup Program
In most cases, the computer will have been properly set up and configured by the
dealer or system integrator prior to delivery. However, it may still be necessary to
adjust some of the computer's BIOS (Basic Input-Output System) setup programs to
change the system configuration data, like the current date and time, or the specific
type of hard drive currently installed.
The setup program is stored in read-only memory (ROM). It can be accessed either
when turning on or resetting the computer, by pressing the “Del” key on the keyboard
immediately after powering up the computer.
The settings that are specified with the setup program are recorded in a special area
of the memory called CMOS RAM. This memory is backed up by a battery so that it
will not be erased when turning off or resetting the system. Whenever the power is
turned on, the system reads the settings stored in CMOS RAM and compares them
to the equipment check conducted during the power on self-test (POST). If an error
occurs, an error message is displayed on screen, and the user is prompted to run the
setup program.
2.4
Installing the Drivers for Win XP
After installing system software, the computer is ready to have the Intel® chipset,
VGA, audio, LAN, and touch screen functions set up. All the pre-requisite drivers are
stored on a CD-ROM disc entitled “Drivers and Utilities” (Check the correct wording
on the CD, which can be found in the accessories box.)
The utility directory includes multimedia programs. Some drivers and utilities in the
CD-ROM disc have their own text files which help users install the drivers and under-
stand their functions.
These files are a very useful supplement to the information in this manual. For more
updated driver please refer to the Advantech website, www.advantech.com/support
The drivers for TREK-753 are listed below; run the executable to install the drivers.
Device
Version
Intel SCH INF Update
8.8.0.1011
Intel US15 GMA500 Graphic Driver
6.14.11.1018
PenMount Universal Driver
2.1.1.0
Realtek RTL8111DL 10/100/1000 PCI-E NIC
5.728.604.2009
Realtek ALC892 High Definition Audio
5.10.0.5804
FTDI FT4232 BUS USB Driver
2.6.0.0
ublox LEA-5S Driver
1.2.0.5
Sierra Wireless MC8790V
6.20.0.7
Ralink RT3091 Wireless LAN Card (AW-NE768)
1.4.2.1
Note!
The drivers and utilities used for TREK-753 are subject to change with-
out notice. If you are in doubt, check Advantech's website or contact our
application engineers for the latest information regarding drivers and
utilities.
Summary of Contents for TREK-753
