Page 1: ......
Page 2: ...firm surface or flat floor Unbalance installation may cause noise and trembling 3 Install the System where there is good ventilation condition Poor ventilation condition may cause a reduction of cooling effect For this purpose please leave at least 10cm of space between the System and the wall 4 Place the assembled water filtration container with the filters vertically on top of the Water Filtrati...
Page 3: ...ry 3 months whichever comes first 2 It is also recommended to wash the water containers the filters and the dispenser every month including draining off all water within the dispenser by releasing water through the Water Drainage Outlet P Beware Water flowing out can be very hot 3 The spilled water in the Drip Tray I must be removed and cleaned regularly Cleaning inner Stainless Steel COLD Water T...
Page 4: ... abrasives bleach detergents solvents or metal scouring pads on any part of the unit When moving the unit must be in vertical position Never lean the water dispenser at the angle of more than 45º as this may cause possible damage to the unit Do not power on the dispenser immediately after switching off Interval of 5 minutes is recommended It Is recommended to turn off the electric mains if the uni...
