13. Insert the Water Tube from the Adaptor
I
to the Water Inlet
B
and Water Tube to
the faucet to the Water Outlet
C
.
14. Turn on water supply. Look out for
leakage. Turn on faucet and let water flow
through about 15 minutes to flush the filter
cartridges.
Caution:
Allow System to flush into sink for 15
minutes. This removes any fine, black carbon
particles left over from the manufacturing
process, expels trapped air and conditions the
Filter Cartridge for normal use. (This flushed
water may be used to water plants.)
Open
Close
REPLACING FILTER CARTRIDGES
1. Turn off the water supply at the Adaptor
I
.
2. Cartridges can be removed by pulling them
outward and twist 90º anti-clockwise to
remove.
3. Insert each filter and twist 90º clockwise.
Push to position. (Please take note of
cartridge sequence, refer to colour)
*NOTE: Do it in sequence. Change Cartridge 1, turn on water to flush, followed by
Cartridge 2, then Cartridge 3 and lastly Cartridge 4.
Summary of Contents for H2O Alkaline+
Page 1: ...Under Sink System ...
