SAFETY INSTRUCTIONS
• This dispenser is designed for INDOOR USE ONLY and should not be used outdoors.
• Always turn off and unplug before proceeding to any maintenance or cleaning.
• Repair or replace immediately, all electrical cords that have become frayed or otherwise
damaged. Do not use a cord that shows crack or abrasion damage along its length and on the
plug.
• To protect against electric shock, do not immerse cord, plug, or other parts of the unit in water.
• This dispenser should not be recessed or built into a enclosed cabinet. It is designed for
freestanding installation only.
• Do not use any chemicals, abrasives, bleach, detergents, solvents or metal scouring pads on any
part of the unit.
• When moving, the unit must be in vertical position. Never lean the water dispenser at the
angle of more than 45º as this may cause possible damage to the unit.
• Do not power on the dispenser immediately after switching off. Interval of 5 minutes is
recommended.
• It Is recommended to turn off the electric mains if the unit is unattended for long hours.
• Do not use water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
TECHNICAL SPECIFICATION
Model:
Rated Voltage:
Rated Frequency:
Total Power Consumption:
Heating Power:
Cooling Power:
HOT Water Tank:
COLD Water Tank:
Water Temperature (HOT):
Water Temperature (COLD):
Refrigerant:
Test Pressure:
Climate Class:
Max. Inlet Water Pressure:
Dimension:
H2O AP-T
220 - 240V
50Hz
600W
480W
0.6A
1.2 litres
3.6 litres
80 - 90°C
4 - 10°C
R134a / 30g
260PSI
T
0.68MPa
H51x W26 x D48cm
H2O AP-S
220 - 240V
50Hz
600W
480W
0.6A
2.1 litres
3.6 litres
80 - 90°C
4 - 10°C
R134a / 36g
260PSI
T
0.68MPa
H111 x W26 x D35.5cm
Summary of Contents for Alkaline Plus H2O AP-S
Page 1: ......
