I-200 Operations Manual
7
1.
Standby
Switches the unit between operational and
standby modes, and, if other ADVANTAGE products
are connected via the data bus, these will also be
switched into the standby mode.
2 & 3.
STEP (+ and -)
To select the current input source to your I-
200, the step buttons are used to switch between the
two balanced and five unbalanced inputs as shown
on the display.
4 & 5.
REC (+ and -)
Not used for I-200. Record out has the same
source as main out.
6 & 7.
BAL (+ and -)
The BAL(ANCE) controls are used to
increase/decrease the left/right channel output level.
8 & 9.
VOL (+ and -)
To set the output volume level the VOL(UME) buttons are used to increase (+) or
decrease (-) the volume level.
10.
DIM
The DIM button gives the listener the ability to adjust the display brightness of the I-
200 to match the lighting conditions of the listening room. The lighting intensity can be set to
three different levels or simply shut off by repeatedly pressing the DIM button.
11.
DISPLAY
If you wish to get a quick overview of the current settings of your I-200, you can use
the DISPLAY button to step through the unit’s menu system.
12.
EDIT
The EDIT button gives the user the ability to change the alias name of each of the
two balanced and five unbalanced inputs. To perform this function, depress the EDIT button
until the first letter of the current inputs alias name begins to flash. To change the flashing
letter, press the VOL+ or VOL- buttons until you find the letter or character you would like to
use. To
move to the next position press the STEP+ (or STEP- to go back). When you are finished
editing the alias name, press EDIT again to store the new name in memory. To abort the
editing process without saving the changes, press the STANDBY button.
13.
SURR