Payment Reminder
[OPTIONAL FEATURE]
•
Locate a switch ignition power wire that reads 12V when the vehicle’s
ignition is in the ON position and 0 Volts when the vehicle ignition is
in the OFF position. The ignition wire retains 12V as the vehicle
is starting.
•
Connect the white wire from harness to the vehicles ignition wire.
•
If the white wire is not connected, the payment reminder feature will
activate upon the change of GPS movement, instead of when the
vehicle starts.
Note:
If the white wire is not connected properly, the payment reminder option
will not function as designed.
BEST PRACTICES
Use a digital voltmeter to read 12V in the ON position
and 0V in the OFF position. This will ensure that the
wire is truly switched at ignition ON/OFF.
6
l
AdvantageGPS Installation Guide
