Advantage Controls GF Series, Installation Maintenance Repair Manual

Page: 3 / 16

3
II. Model Numbering and General Specifications
BUILD A MODEL GF - __ __ __ __ __ __ - __ __
TANK SELECTION
0 = No tank
1 = 55 gallon poly
2 = 100 gallon poly
3 = 30 gallon poly
7 = 150 gallon poly
STAND SELECTION
A = Powder Coated steel stand
B = Powder Coated steel stand w/ mixer bracket
C = Tank top mount (no tank included)
D = Portable stand with built in rollers
PUMP SELECTION
0 = No pump
1 = 1.5 gpm at 100 PSI; 1/3 hp
2 = 3.75 gpm at 100 PSI; 1/2 hp
3 = 6.1 gpm at 60 PSI; 3/4 hp
4 = 9.9 gpm at 60 PSI; 1.5 hp
5 = 30 gpd at 100 PSI; solenoid driven
PUMP CONFIGURATION
A = Standard configuration
B = Alternating pumps for single loops
(requires 2 pump selections)
C = Pump plumbed for transfer duty into tank
LOOP SELECTION
0 = No loop
1 = Sch 80 PVC loop; 100 PSI max; 100 ° F max
2 = Copper/brass loop; 100 PSI max; 180 ° F max
3 = Carbon steel loop; 100 PSI max
CONTROL SELECTION
M = ETL listed NANO-N with alarm buzzer and dry contact
N = ETL listed NANO-N controller with timer for relay 2
(single loops)
OPTIONS
1 = 240V
2 = 4-20mA output of pressure on digital controller
3 = Solenoid valve for pressure relief on digital units
4 = 30-50 PSI pressure switch for analog units
5 = Position backcheck to use tank for expansion
H = 1/4” PVC pipe instead of pump suction tubing
M = Mixer controls (order mixer separate)
Y = ETL approval (only on units with controller option D)
Most units include poly tank and stand, low
level switch with audible alarm (100db) with
silence switch, dry contact alarm, pressure
relief valve and plumbing assembly with
pressure gauge.