Controller for 24 VDC motors only!
There are 4 circuit breakers in this box. They are designed to
give protection from overloads.
When a breaker trips (a tab pops out of the breaker) check
curtains for any electrical issues or
mechanical
obstructions.
Then press the tab back into the breaker to reset it.
Two of these breakers are on the circuit board. Each protects
one unit. If one breaker trips, the other unit will function.
Note: The breaker may not connect immediately after being
reset. The breaker needs to cool to resume operation
The two circuit breakers on the bottom
of
the box protect the
transformer. If either one trips, there will be no power to any
units.
