2
The RSM Part # AT8429A includes:
1. Part # AT8414A Speaker/Microphone
2. Part # AT8419A
Control Module
3. Part # AT8417A
Coil Cable
Optional Extras
Part # AT8416A
Replacement Li‐Ion Battery
Set up of RSM
IMPORTANT PHONE SETTINGS
The following are phone settings that are needed for
with the dvanceTec SM:
operation
A
R
Settings DC Settings Direct Connect N
1. Press >
>
>
O
Settings DC Settings > Headset ode Headse
rts DC c ls. [DC button].
2. Press >
>
M
>
t
tton sta
al
bu
3. Press > Settings > Others > Accessibility > TTY >TTY Off.
4. Increase or Decrease the volume must be done while phone
is connected to the RSM and is on an active call.
1. Plug the 2 pin connector at the end of the coil cord of the
speaker/microphone into the corresponding socket on the
top corner of the Control Module.
2 Pin Connector
2 Pin Socket
3
2. Clip the Speaker/Microphone onto the lapel or other
convenient place on the users clothing.
3. Clip the Control Module onto the user’s belt.
4. Connect the Control Module to the handset using the coil
cord supplied, via the audio socket of the handset and the
corresponding audio socket on the Control Module.
Operating the RSM
1. Press the PTT on the side of the Speaker/Microphone and
speak towards the speaker/microphone to transmit
2. Release the PTT button of the speaker/microphone to
listen.
The
audio
will
be
heard
from
the
speaker/microphone.
Charging the Control Module
1. The Control Module has an internal rechargeable Lithium
Ion battery which, like the phone, requires regular charging.
2. Before using for the first time, charge the battery in the
Control Module for 24 hours.
3. Use the power supply, supplied with your phone to charge
the Control Module. If the connector on the power supply
supplied with your phone is not a Micro USB, it will be
necessary for you to purchase a conversion connector to
convert the connector to a Micro USB connector, or purchase
a power supply with a Micro USB connector. This type of
conversion connector or power supply with Micro USB
connector is readily available from your local phone supply
store.
LED indicator of the Control Module
The LED indicator on the Control Module is multi colored.
1. When the Control Module is connected to the power
supply and the power supply is plugged into an Power AC
outlet, the LED will light RED.