Advanced MX-4200V Manual Download Page 35

Page: 35 / 72

3.3.3.2 Procedure if the Panel finds Devices Missing

When the panel cannot communicate with a device previously programmed into the panel, the Auto Learn
process is suspended and the display shows a pop-up window with options. For example:

KEEP THIS DEVICE

DELETE THIS DEVICE

KEEP ALL MISSING

DELETE ALL MISSING

! Address 002 DEVICE MISSING

If the missing device is kept (or all missing devices are kept), the panel remembers the programming for these
devices. The panel will report a fault condition until such time as the missing devices are reconnected.

If the missing device is deleted (or all missing devices are deleted), the panel clears all previous programming
for these devices. This includes any sensitivity threshold changes, text assignments, zone assignment, action,
etc.

Press the



buttons to highlight the required menu option and then press the

✔

button to confirm. The pop-up

window will disappear and the panel will continue with the auto learn process.

If a single device is deleted and another missing device is subsequently registered, the display will once again
show the pop-up window to keep or delete this device.

3.3.3.3 Procedure if the Panel finds Devices Added

When the panel finds a device not previously learnt and programmed in the panel, the Auto Learn process is
suspended and the display shows a pop-up window with options. For example:

ACCEPT NEW DEVICE

REJECT NEW DEVICE

ACCEPT ALL NEW DEVICES

REJECT ALL NEW DEVICES

! Address 002 NEW DEVICE

If the new device is accepted (or all new devices are accepted), the panel will configure the memory to register
these devices. All data will be configured to initial settings for sensitivity threshold changes, text assignments,
zone assignment, action, etc. for these devices.

If the new device is rejected (or all new devices are rejected), the panel clears all programming for these
devices and will not attempt to communicate with the devices at these addresses.

Press the



buttons to highlight the required menu option and then press the

✔

button to confirm. The pop-up

window will disappear and the panel will continue with the auto learn process.

If a single device is accepted / rejected and another new device is subsequently registered, the display will once
again show the pop-up window to accept or reject this device.

3.3.3.4 Procedure if the Panel finds Devices Changed

When the panel finds a new type of device installed at an address previously learnt and programmed in the
panel, the Auto Learn process is suspended and the display shows a pop-up window with options. For example:

ACCEPT NEW DEVICE

KEEP OLD DEVICE

ACCEPT ALL NEW DEVICES

REJECT ALL NEW DEVICES

! Address 002 TYPE CHANGE

This situation could arise for example if a heat detector has been installed in place of an optical smoke detector.

If the new device type is accepted (or all new device types are accepted), the panel will configure the memory to
register these devices. All data will be configured to initial settings for sensitivity threshold changes, text
assignments, zone assignment, action, etc. for these devices.

www.acornfiresecurity.com