The programmer has two diodes
D
,
K
, Ready
and a
sound buzzer
.
LED features:
D LED
indicates diagnostic status.
K LED
shows the status of the data for key generation.
Ready
LED
D
- flashes
green
after establishing communication with the car.
Light is
always on
:
green
on successful completion,
red
on failure.
K
-
green
if the device has found all the data for the key. Flashing
red
if
the data from DDE / DME is not read.
R
ed
light is always on
: it is possible to program
only the “service key”
Sound signals:
1) Rising sound - from low to high - successful programming
2) Long constant sound -
only “Service key” is possible.
Reconnect the OBDII and repeat again.
3) Lowering sound - from high to low - unsuccessful shutdown
4) Short double beep - insert the key into the ignition slot and turn on the ignition.
If the programmer LEDs
blink
red and a constant beep is heard immediately it
means a programmer malfunction. Mail or call us to arrange the device
repairing.
Summary of Contents for BMW OBDII
Page 3: ...Device description...
