9
SCAN / DW FOR A CHANNEL / CTCSS / DCS
NOTE
:
will be disabled when Scan function is activated
.
or
NOTE
:
If you activate a scan while your code is set to 0, the radio will check for any
activity on each channel, regardless of the code used on that channel. If you activate a
scan while the CTCSS or DCS code is set, the radio will only check for activity on the
specified channel and code combinations set on your radio.
To auto-scan / DW for a channel / CTCSS / DCS:
3.
Press and release
to enter scan mode.
4.
Press
to enter the Tx mode on the last valid channel in memory and
continue to scan after the button is released.
5.
Long press
to terminate the All Scan mode. The radio will then return to the
last valid channel.
1.
DW or Scan function is selected by PC program.
2.
Channel for DW is chosen by PC program.
See below for some common problems and their remedies. DO NOT attempt any repairs
yourself. This will invalidate your warranty.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES / REMEDIES
Can’t turn the radio on
Check the battery is correctly installed
●
and has been
fully charged
Can’t communicate with
other radios
VOX function is not working
●
Check the headset is correctly plugged in and is
compatible with the Mini 391 radio
●
For this and all other issues contact
Advanced Wireless
Communications at 1-800-475-5852 or
www.advancedwireless.com
for more information