OVERVIEW
The AV102SS intercom system designed to interface directly with the
Adpro
fast-scan,
FastVu and FastTrace Video/Audio transmission systems. It is constructed entirely of
Stainless Steel for the ultimate in durability and robustness.
It is Vandal-Resistant and weatherproof, making it ideal for use in external public areas
such as help-points, door and gate access control systems and lift intercoms.
The faceplate and housing have a Grained (illustrated) finish as standard. A highly
polished finish is available as an optional extra. We also provide a faceplate engraving
service if required, as an optional extra.
The faceplate is attached to the housing using HEX-PIN, stainless Steel machine screws.
This prevents the removal of the faceplate without the correct security tool (supplied).
The system comes complete with power supply and audio interface (the AVPSU4) which
provides audio in and out at industry standard levels, in addition to the 15 pin "D"
connector for direct connection to Adpro remote transmitters (see specifications on last
page).
The system may be operated on either balanced-line or single-ended systems.
The intercom unit may be fitted with the following options, if required:-
♦
An internal Covert monochrome camera ( Add suffix /CVM to part code )
♦
An internal Covert colour camera (Add suffix /CVC to part code)
♦
A solid-state audio message system which will give a voice message of up to 16
seconds when the call button is pressed ( Add suffix /A to part code ).
Where a camera is fitted, the Video output is via an internal video ground-loop isolation
transformer and utilises a standard 75 Ohm BNC connector.
The unit requires 24 Volts DC power which is normally supplied from the (included)
interface unit.
All connections are made via 2-part screw terminals, so that the connections can be made
using just the faceplate Hex-Pin tool (supplied in the kit) and a small, flat-blade
screwdriver!
An optional switching card (model 102PAIR1) may be fitted to enable two units to be used
in a master/slave combination, using only a single channel of the ADPRO transmission
system. This may be used, for example, where an IN/OUT gate requires an intercom on
both sides of the gate. The advantage of this is that only a single set of wiring is required
from the equipment room to the master intercom, and then a similar set of wiring between
the Master and the Slave units, which will normally be only a few metres apart.
DOCUMENT NUMBER AV102SS/OEM/01 REVISION 6.1 1st August 2006 Page
2
of 22
