E
F
Thank you for purchasing this Advanced Solutions™ thermometer. We’re proud to be
your choice to help you keep your child healthy and safe. Please be sure to read all
warnings, instructions and notations before using this product.
User’s Guide TH053
Easy Read 4-in-1 Thermometer
Easy Read 4-in-1 Thermometer
Basics of Your Thermometer
Normal Body Temperature
Memory Recall
Select Mode
Trouble Shooting
Temperature
Unit of Measure (˚F/˚C)
Low Battery
Modes
ORAL
RECTAL
UNDERARM BATH WATER
Memory
Fever Light
TM
(Screen Flashes)
Probe Tip Cap
Probe Tip
Insertion Gauge
Illuminated Display
with Fever Light
TM
ON/OFF Button
Thermometer stores the last temperature reading with the
site from which it was measured. As a reference for parents,
that temperature reading displays automatically when the
thermometer is powered on.
• While the thermometer is off, press and hold the ON/OFF
button for 3 seconds.
• Press the button again to cycle through the four mode
options (Figure C).
• When the desired mode displays on screen, wait for auto
shut-off to select it.
METHOD
Oral
Rectal
Underarm
NORMAL
TEMPERATURE
97.0° - 99.6°F
97.3° - 100.4°F
95.4° - 98.6°F
FEVER
RANGE
99.6°F +
100.4°F +
98.6°F +
Display Recommended Action
Display Recommended Action
•
Probe may not have been positioned correctly. Proper probe placement is essential for an accurate reading. Review probe
placement instructions and try again.
•
If thermometer has been stored in a cold environment, wait 15 minutes to allow thermometer to reach room temperature, then try again.
•
If you are measuring bath water temp, confirm that thermometer is in bath temperature mode (bth). A reading below 89.6°F
will cause the
L display.
•
If thermometer has been mishandled, you may have irreversibly damaged product. Confirm other possible solutions (above)
before discarding.
•
Turn thermometer off, wait one minute, then re-take temp.
•
If thermometer has been stored in a hot environment, wait 15 minutes to allow thermometer to reach room temperature, then try again.
•
If you are measuring bath water temp, confirm that thermometer is in bath temperature mode (bth). A reading above 111.1°F
will cause the
H display.
•
If thermometer has been mishandled, you may have irreversibly damaged Product. Confirm other possible solutions (above)
before discarding.
•
Battery icon displays when battery is getting low. A few more readings may be possible, but it is time to
purchase a new battery.
•
Battery icon flashes when battery is completely exhausted and needs to be replaced.
•
Measured body temperature is in fever range or bath water temperature is too hot. (See Fever Light
TM
section for details).
•
Do not return this product to the place of purchase. If any parts are missing, email [email protected],
call Consumer Relations at (800)544-1108, or fax at (800)207-8182. You can also visit our website at
www.safety1st.com. Have ready the model number (TH053) and date code (manufacture date located on
package).
•
Install new batteries and re-try function before calling Consumer Relations on electronics.
•
If thermometer has been mishandled, you may have irreversibly damaged it.
Shut off and restart before discarding.
Care and Maintenance
One (1) Year Limited Warranty
Technical Specifications
How to Replace the Battery
Cleaning Probe Tip:
• Clean before and after each use.
• Use an alcohol swab to wipe clean.
Cleaning Thermometer Body:
• Use a soft, dry cloth to clean thermometer body.
Notes:
• DO store thermometer in a dry place at room temperature
with the protective cap in place.
• DO take special care not to scratch the display window.
• DO NOT use abrasive cleaning agents, thinners or benzene
for cleaning.
• DO NOT expose thermometer to extreme temperatures,
humidity or direct sunlight.
• DO NOT drop thermometer.
Dorel Juvenile Group, Inc. warrants to the original purchaser that
this product (Thermometer), is free from material and workmanship
defects when used under normal conditions for a period of one (1)
year from the date of purchase. Should the product contain defects
in material or workmanship Dorel Juvenile Group, Inc., will repair or
replace the product, at our option, free of charge. Purchaser will be
responsible for all costs associated with packaging and shipping the
product to Dorel Juvenile Group Consumer Relations Department at
the address noted on the front of this document and all other freight
or insurance costs associated with the return. Dorel Juvenile Group
will bear the cost of shipping the repaired or replaced product to
the purchaser. Product should be returned in its original package
accompanied by a proof of purchase, either a sales receipt or other
proof that the product is within the warranty period. This warranty is
void if the owner repairs or modifies the product or the product has
been damaged as a result of misuse.
This warranty excludes any liability other than that expressly
stated previously, including but not limited to, any incidental or
inconsequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO
STATE.
Measurement Range: 89.6° F to 111.1° F
Measurement Accuracy:
+/- 0.2° F for temps 98.6° F to 102.2° F
+/- 0.3° F for temps 96.4° F to <98.6° F or >102.2° F to 105.8° F
+/- 0.5° F for temps <96.4° F or >105.8° F
Operation Environment: 60.8° F to 104° F
Storage Environment:
-4° F to 120° F
Test Protocol: Unit must be tested using water bath.
• When the “ ” icon
appears while the unit is
ON, (Figure D), the battery
is nearly exhausted, but a
few measurements may
still be taken.
• When the “ ” icon
flashes, (Figure E), the
battery is exhausted and
need to be replaced.
To Replace Battery:
1 Use a coin to loosen battery
cover. Remove cover (Figure F).
2 Pry battery from compartment and discard properly.
3 Insert a new 3-volt battery (CR2032 or equivalent), correctly
positioned with the positive “+” side facing up as shown in
illustration (Figure G).
4 Place the battery cover on the thermometer and secure the cover.
©2012 Cosco Management, Inc.
All Rights Reserved. Todos derechos reservados. www.djgusa.com
(800) 544-1108 www.safety1st.com
Made in CHINA. Hecho en CHINA.
Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc.,
2525 State St., Columbus, IN 47201-7494
Dorel Distribution Canada, 873 Hodge, St. Laurent, QC H4N 2B1
11/07/12 4358-6048A
Coin
Positive
ORAL
— For children 4 years and
older.
1.
Confirm that
oral mode is
selected
.
2.
Ensure that
L
displays and
that °F (or °C)
is still flashing, then place probe
tip under the tongue in locations
indicated by . Instruct children
not to bite down on the probe.
UNDERARM
—For child under
age 4 who will not cooperate with rectal
temperature measurement.
1.
Confirm that
underarm mode is
selected
.
2.
Wipe underarm
with a dry towel.
Probe must touch
skin.
3.
Ensure that
L displays and that °F (or
°C) is still flashing, then place probe
tip at center of underarm. Bring arm
down against the body.
RECTAL
— Highly accurate for measuring
core body temperature. Pediatrician
recommended mode from birth to age 1, and
beyond as tolerated by child.
1.
Confirm that rectal mode
is selected
2.
Lubricate probe tip with
a water-soluble lubricant
or petroleum jelly. For easier insertion,
position baby so that the back and legs
form a 90-degree angle (L-shape).
3.
Ensure that
L displays and that °F (or °C) is
still flashing, then insert probe tip no more
than 1/2 inch (1.3 cm) into rectum. Do
not force the tip into rectum if resistance is
encountered.
BATH WATER
— Ideal bath water
temp is between 90° F and 100° F.
1.
Confirm that bath water mode is
selected
.
2.
Ensure that
L displays and that °F
(or °C) is still flashing, then place
probe tip into bath water, up to
the insertion gauge. DO NOT allow
electronics to get wet.
How to Measure Temperature
Specifics for each Temperature Mode
Please read this section carefully and all the way through before using the thermometer.
Ensure that thermometer is at room temperature, waiting 15 minutes if necessary.
• Remove probe tip cap. Press and release ON/OFF button. All segments display for 1 second (Figure A) as the thermometer powers on.
• Thermometer beeps once, and the last temperature measured displays on screen (Figure B) for a few seconds.
• The current selected mode flashes and then °F (or °C) flashes. Confirm that the desired temperature mode is selected. (See “Select Mode” to change
temperature mode.)
A
B
Red backlight
is illuminated
F
D
E
G
WARNING
• This is NOT an ear thermometer. Take
temperature measurements Underarm, Orally
or Rectally.
• NEVER allow a child to play with this
thermometer. It is not a toy. This is a sensitive
electronic device and may be damaged if not
used properly under parental supervision.
• ALWAYS supervise your child when using
thermometer. NEVER allow your child to use
it alone or without close parental supervision.
•
Avoid sudden impact and dust.
•
Do not expose the thermometer to extreme
temperatures, humidity, direct sunlight or
shock.
•
Replace only with CR2032 or equivalent
lithium battery. Use of other types of batteries
may present a risk of fire or rupture.
BATTERY CAUTION
• Keep batteries out of child’s reach. Swallowing a
battery could be fatal.
• Used batteries should be disposed of properly.
• Battery should not be charged or placed into
extreme heat as it may explode.
• Remove batteries when stored for long periods
of non-use.
IMPORTANT INFORMATION
• Read these instructions carefully to ensure accurate
temperature readings. Temperature readings are
affected by many factors including exercise, drinking
hot or cold beverages prior to taking a reading as well
as technique.
• Rectal temperatures vary by approximately
0.9°F/0.5°C.
• DO NOT allow child to walk or run during temperature
taking. Probe could present a hazard.
• When °F (or °C) stops flashing, the measuring is complete. Approximate measurement times are: 5 seconds for oral and rectal temps, 8 seconds for underarm temp and 8-15 seconds for
bath water temp.
• Remove probe tip from body location or bath water and check temperature.
• Thermometer beeps and the display glows with red backlight to indicate that fever has been detected or that bath water is too hot. (See Fever Light™ section for details.)
• Thermometer will shut off automatically after one minute, or press button to shut off.
Fahrenheit / Celsius
• Power on the thermometer.
• During the first 5 seconds, press and hold the ON/OFF button
until °F or °C flashes.
• Quickly press ON/OFF button to switch between °F and °C
modes.
• When the desired unit of measure (°F or °C) displays on screen,
wait for auto shut-off to select it.
Temperature readings are different from person to person and also vary
depending upon the body location from which the temperature is measured.
For example: Oral temperatures tend to be comparable to ear temperatures and
approximately 1° lower than rectal temperatures for the same individual. Temperature
readings can also be affected by other factors, including exercise, consuming
hot or cold food/beverages prior to taking a reading, and technique.
“Normal” temperature refers to each individual’s average temperature while
healthy. You may want to measure and record your child’s temperature a few
times when he or she is well, so that you will know what is normal for your
own child. On average, temperature ranges are as follows:
Fever Light
TM
The backlight illuminates red and thermometer beeps when:
• body temperature is in the fever range
(varies by measurement site, see chart above)
• bath water temperature is too hot (exceeding 100.0˚F)
High or prolonged fever requires medical attention, especially for
young children. Contact your physician. A fever chart is included on
the product.
Temperature
Unit of Measure (˚F/˚C)
Low Battery
Modes
ORAL
RECTAL
UNDERARM
BATH WATER
Memory
Fever Light
TM
(Screen Flashes)
C
