background image

WARNING: DANGER OF SCALDING

SAFETY RULES AND CAUTIONS

The plug must be removed from the socket-outlet before cleaning or maintaining the appliance and after use.

The appliance shall not be left unattended while it is connected to the supply mains.

Do not use the machine without the lower drum.

Do not fill the boiler tank with detergent or disinfecting products. (use only water).

Do not turn the device upside down (the solenoid valve may get clogged).

Do not suck flammable materials, explosives, concrete, ash, gypsum or any other material which might create a 
dangerous mixture.

If corrosive substances are sucked, the lower drum might be damaged. We recommend empting and rinsing it 
well.

Make sure the surfaces and the parts to be cleaned can withstand the steam (at the beginning we recommend 
using the steam on small surfaces).

Do not use steam on velvet, satin and leather.

Before connecting your device, check that the voltage corresponds to the one written on the technical plate 
(230V).

Do not use the appliance near people not wearing safety clothings.

WARNING: high power jets can be dangerous if used improperly. Never direct the jet towards people, animals, 
electrically powered appliances or towards the appliance itself.

Never direct the jet towards yourself or other people for cleaning clothes and shoes.

Use this device only for the functions it is conceived for.

Disconnect the power supply before carring out the maintenance operations.

To disconnect the device, pull only the plug, ever the cable.

Be careful the supply cable does not touch hot surfaces.

Never use the device if the feeding cable or its other important parts are damaged for example, safety devices, 
high pressure flexible tubes, handle with controls.

To avoid any risks of being electrocuted, do not disassemble it.

Avoid connecting more powerful appliances to the same electric circuit.

If an extension cable is needed, make sure it is provided with earth; the plug and the socket must be watertight.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

WARNING: unsuitable extension cables can be dangerous.

Use an outlet provided with earth.

Do not plunge the device into the water and do not use it in case of rain or snow.

Do not sprinkle or wash the appliance.

This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience 
and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way 
and understand the hazards involved.

Children shall not play with the appliance.

Children being supervised not to play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Keep the appliance out of reach of children when it is energized or cooling down.

The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

Liquid or steam not directed towards equipment containing electrical components.

Do not let the connected device be unguarded.

Remember to disconnect the device before any cleaning or maintenance operation and at the end of every use.

Let the device cool down before putting it back.

Precautions during user maintenance: see"Maintenance of the hose"(pag. 5) and "Routine maintenance” (pag.7).

Empty and rinse the lower drum after any use.

For any repair, take the device to an authorised technical service.

To ensure the safety of the appliance, use original spare parts supplied or approved by the manufacturer only.

WARNING: hoses, accessories and connections are important for the safety of the appliance; use parts recommended 
by the manufacturer only.

Any intervention carried out by non-authorised make the warranty forfeit. The manufacturer is not to be held 
responsible for any failure due to incorrect use and maintenance.

Summary of Contents for P-410

















Reviews: