F.
HOW TO: IF LIMITS NEED TO BE RESET. DO THE FOLLOWING:
1.
ALWAYS SET THE LOWER LIMIT FIRST
2.
USE THE REMOTE TO MOVE THE BOTTOM BAR TO ITS LOWER LIMIT
3.
USING A PAPER CLIP OR PIN, PRESS THE PROGRAM BUTTON FOUND IN THE HOLE ON THE
BACK OF THE HAND HELD REMOTE. THE MOTOR WILL JOG TO CONFIRM THAT IT IS OPEN
FOR PROGRAMMING
4.
PRESS UP OR DOWN BUTTON TO FINE TUNE YOUR LIMIT.
5.
WHEN THE DESIRED POSITION IS REACHED PRESS STOP BUTTON TO IDENTIFY THIS AS THE
LIMIT
6.
PRESS THE PROGRAM BUTTON. THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM THAT
IT IS CLOSED TO PROGRAMMING. LOWER LIMIT PROGRAMMING IS COMPLETE.
7.
NOW SET THE UPPER LIMIT AS FOLLOWS
(A) USE REMOTE TO MOVE THE BOTTOM BAR TO THE UPPER LIMIT
(B) USING A PAPER CLIP OR PIN, PRESS THE PROGRAM BUTTON FOUND IN THE HOLE ON
THE BACK OF THE HAND HELD REMOTE. THE MOTOR WILL JOG OR BEEP 5 TIMES TO
CONFIRM THAT IT IS OPEN FOR PROGRAMMING
(C) PRESS THE UP OR DOWN BUTTON TO FINE TUNE YOUR UPPER LIMIT.
(D)WHEN THE DESIRED POSITION IS REACHED PRESS THE STOP BUTTON TO IDENTIFY THIS
AS THE LIMIT
(E) PRESS THE PROGRAM BUTTON. THE MOTOR WILL JOG OR BEEP 3 TIMES TO CONFIRM
THAT IT IS CLOSED TO PROGRAMMING.
G.
HOW TO: SYNCHRONIZE A 2
ND
REMOTE (EITHER A 2
ND
HAND HELD OR WALL MOUNT) TO THE
MOTOR:
1.
PRESS AND HOLD THE STOP BUTTON ON THE PRIMARY HAND HELD REMOTE. THE MOTOR
WILL JOG OR BEEP 5 TIMES. RELEASE THE STOP BUTTON.
2.
PRESS AND RELEASE THE UP BUTTON ON THE 2
ND
REMOTE. THE MOTOR WILL JOG OR BEEP
3 TIMES TO CONFIRM THAT THE 2 REMOTES ARE SYNCHRONIZED.