CLEANING AND MAINTENANCE
Clean the dust collector cell
3
4
Shake excess water from the dust collector cell to
speed up drying time.
Thoroughly dry the dust collector cell
Please take care not to damage any wiring while
cleaning the dust collector cell, if any wire is broken,
the unit will lose part or all of its dust collecting
capability.
Any broken wire should be thrown away instead
of being left inside the unit. Otherwise, a dangerous
short-circuit or high-voltage sparks may occur. Please
contact authorized service center for maintenance or replacement.
Use provided brush or toothbrush to clean.
12
DO NOT install a damp dust collector cell directly
into the unit may cause dangerous short-circuit or
malfunction.
Please refer to instructions on page 7 for resetting
after cleaning, otherwise the indicator will remain
on screen.
5
Reset the "CLEAN CELL” indicator
Note :
If the front cover or dust collector cell is not
properly installed after cleaning, the unit will not
operate.
Summary of Contents for Newport ULTRA
Page 2: ...NEWPORT U L T R A AIR PURIFIER PURE CONTROL ...
Page 3: ......