Spatial Reference Manual
Page 66 of 158
Version 4.4
04/06/2019
11.4.3
Linux
If serial ports do not show up, the typical cause is permissions. The user should add
themselves to the dialout group with the command sudo adduser username dialout.
Compiz causes issues with the 3D mapping. If you are experiencing problems it is
recommended to turn off compiz. Modemmanager can also sometimes cause problems
on Linux installations. If you are not using a modem, it is recommended to remove
modemmanager with the command sudo apt-get remove modemmanager.
Spatial Manager is able to run on the OpenJDK JRE but it uses significantly more
system resources than when it is running on the Oracle JRE.
Illustration 24: Screenshot of latency timer setting