Advanced Measurement Technology 273A, User Manual

Page: 32 / 70

26
Model 273A Potentiostat/Galvanostat User’s Manual
Fig. 5. Model 273A Front Panel.
4. Status of the scan, such as:
a. Delay Time Remaining (Delay specified in seconds).
b. Time Remaining Until Drift Measurement Can be Made (Delay specified in mV/s).
Alternatively, measured drift rate if measurement has taken place.
c. Stop Scan.
d. E Applied or I Applied, according to the selected mode.
Error messages can also be displayed on the bottom line. These include front-panel Error
Messages, which can be cleared by pressing any key, and Remote Error Messages, which only
occur when controlling the Model 273A from a remote computer. Remote Error Messages are in
two parts, the Error #, and then the Command that caused the failure. Remote Error Messages
can only be cleared by taking appropriate action at the remote computer or cycling the power.
The bottom line display can also be used to scroll through the available Overrides (see
Section 5.2.4) using the up and down arrow keys. This capability becomes available once one of
the overrides has been called up for display.
To the right of the display is a screwdriver adjustment that allows the display's angle to be
adjusted for optimum readability.