7
Enviro Kiosk
Assembly and Operation Instructions
8/27/19
Earthquake Zones
If the Enviro Kiosk is located in an area prone to earthquakes a professional engineer should
consulted to recommend installation requirements to adhere with the building codes in your
region. Also note the following.
-
If needed, Advanced Kiosks can supply additional brackets specified per your
professional engineer’s review.
Power Considerations
The Outdoor Enviro Kiosks operates at 12VDC. This safe, extra low voltage drastically limits
the user’s risk.
A 110v power source will go directly into the kiosk from the bottom. It is recommended a
conduit is run from the power origin into the kiosk with the power line and data line inside.
Power leaving the conduit can be secured in the junction box located in the bottom section of the
kiosk. This is a sealed box for protection and should be done by a professional electrician.
There is a test power cable attached to the junction box. This is for
TESTING
only, when
installed it needs to be removed and replaced by the 110v power line.
Test Cable in Kiosk. WARNING: DO NOT USE AFTER INSTALLATION
