10
© Copyright Advanced Keys Inc. 2011. All Rights Reserved.
REMOTE START FUNCTION (OPTIONAL)
A built-in Remote Start function is available when system is connected with an Advanced Keys Smart
Key System. To enable remote start function the following conditions are required:
•
Internal Jumpers JP1, JP2 and JP3 are set at their default position.
•
-
-104 Smart Key System or newer.
See www.advancedkeys.com for more information.
•
System successfully programmed for Tach Ignition and has passed Ignition Testing.
•
Neutral Safety Switch input must be connected correctly and passed Neutral Safety Switch Testing
Neutral Safety Switch Connection
In most automatic transmission vehicle the shifter has a built-in mechanism that lock-out the starter
and prevent ignition while in drive gear. If vehicle has the built-in starter lock-out, connect Neutral
Safety Switch input directly to ground as shown in
Figure A
. If the vehicle is a manual transmission or
does not have starter lock-out function, connect Neutral Safety Switch input as shown in
Figure B
.
To Neutral Safety
Switch Input
Figure A
Figure B
Neutral
Park
To Neutral Safety
Switch Input
Once Neutral Safety Switch input has been connected the starter lock-out function must be tested.
Use the following steps to confirm this safety feature:
Neutral Safety Switch Testing
1. Make sure there is sufficient clearance around the vehicle allow for small movement.
2.
3. Engage the emergency or hand brake.
4. Turn the key to the ON position to releases the shifter interlock.
5. Place the car in drive (D) and turn the key to OFF position.
6. Without step on the brake pedal, place your foot over it and be ready to step on the brake if the
starter engages.
7. Trigger the remote start via Smart Key remote.
8. If the starter engages, immediately step on the brake to shut the remote start. Verify brake input if
the starter does not shutdown. If the starter does not engage then safety system is working.
Remote Start Ignition Takeover
Use the following steps to takeover from a remote started vehicle without shutting down the engine:
1. Approach and disarm the vehicle with a valid Smart Key.
2. Enter the vehicle without stepping on the brake.
3. Press the push-start button
once
to switch to ACC mode and wait until Green Status LED light
turns OFF and Backlight turns ON.
4. Step on the brake to exit Remote Start mode and switch to normal RUN mode.
5. Vehicle is now safe to take out of the PARK/NEUTRAL gear for driving.
Do not return the vehicle to the customer until this safety feature is working properly!
Please ensure the remote starter is disabled by toggle OFF the Neutral Safety Switch
input before servicing. (See Figure B)
WARNING
WARNING
P
R
N
D
L
ON
OFF
Neutral Safety Switch
Enable/Disable Toggle
