Advanced Instruments Osmo1 User Manual Download Page 22

Page: 22 / 72

Chapter 2

Osmo1 user interface

Osmo1

Single-Sample Micro-Osmometer User Guide

2.3 Home screen

The Home screen is the screen from which you perform
sample testing.

Table 3 lists interface elements that are specific to the
Home screen. Figure 9 shows the location of these
elements on the display.

NOTE:

The Home screen goes dim after 10 minutes of
inactivity. If a user was logged in to the Home
screen, the system logs out that user.

Item

Description/Use

NOTE:

The color of the Login button

indicates the login status:

•

Gray:

No one is logged in.

•

Orange:

No one is logged in; login

is required to begin testing. (See

“Requiring IDs for testing” on
page 48.)

•

Green:

A user is logged in. The

username displays next to the
icon.

To log in:

Tap the Login button (gray

or orange) to display the user list.

Then select your username from the

list and enter your password.

To log out:

Tap the (green) Login

button.

Latest test sample osmolality

reading, sample ID, date and time of

last test

Test progress bar

Sample ID button
Tap the button to display a keyboard

and activate the barcode scanner;

then use the keyboard or barcode

scanner to enter the sample ID.

NOTE:

The color of the button

indicates the Sample ID status:

•

Blue:

Sample ID is optional.

•

Orange:

Sample ID is required.

(See “Requiring IDs for testing” on

page 48.)

Example of a warning message

Tap to display the Main menu

Table 3: Items on the Home screen

Enter sample ID

Display Main

Progress bar

Warning message

Latest test

Figure 9: Home screen elements

2.4 Main menu

The Main menu (Figure 10) provides a button for each
user interface section: Calibration, Results, Settings, and
Diagnostics.

Figure 10: Osmo1 Main menu

Table 4 provides an overview of each section.

Function

Description/Use

Calibration

Displays the Calibration screen; see Chapter 4

on page 30 for details.

NOTE:

The Osmo1 has been calibrated at the

factory. However, you should recalibrate it in

certain circumstances. See “When to

recalibrate” on page 30 for more

information.

Results

Displays a list of test results; see Chapter 5 on

page 33 for details.

Settings

Displays the Settings menu for access to

configuration options; see Chapter 6 on

page 35 for details.

Diagnostics

Displays the Diagnostics menu for access to

system tests and performance data; see

Chapter 7 on page 50 for details.

Table 4: Main menu buttons

Summary of Contents for Osmo1









































































Search results

Summary of Contents for Osmo1

Reviews:

Advanced Instruments Osmo1, User Manual, Page: 22 / 72

Search results

Summary of Contents for Osmo1

Reviews: