Advanced Energy HFV 8000, User Manual

Page: 69 / 142

5705211-C Communication Interfaces 4-33
HFV 8000 Generator
220
report
customer
service
statistics
Reads statistics on events in the unit. The
command from the Host should contain a
one-byte number indicating which statistic
value is wanted. The controller returns 4
bytes (4-9 represent a 32-bit number count of
the event):
• 0 = AC On total time
• 1 = RF On total time
• 2 = Total kilowatt-hours delivered
• 3 = Joules
• 4 = The number of times the unit has
been powered on
• 5 = The number of times RF output has
been enabled
• 6 = The number of DeviceNet
communication faults that has occurred
• 7 = The number of times RF enable has
been set without the interlock set
• 8 = The number of line faults that have
occurred
• 9 = The number of overtemperature
faults that have occurred
• 10 = The number of host port heartbeat
time-outs
1 4
221
report last
ten faults
Returns fault codes for the last ten faults. The
controller returns 10 bytes. Each byte
contains a fault code. The low order byte is
the most recent fault. The fault codes are:
• 0 = No fault
• 1 = Overtemperature fault
• 2 = Line fault
• 3 = RF enable without interlock fault
• 4 =
DeviceNet communications fault
• 5 to 254 = Undefined
0 10
Table 4-7. Host port commands (Continued)
Command Description Number of
Host Data
Bytes Number of
Response
Data Bytes