Advanced Energy AE 3TL 1000 Series, Installation And Operation Manual

Page: 19 / 126

☞
Important
This equipment must be installed and used in accordance with the Conditions
of Use described in this manual. If this equipment is expanded, modified, or
installed into a larger system, the user is responsible to guarantee the
compliance of the overall system. If this equipment is used with external
components, the user must ensure that the Safety and EMC requirements are
not violated.
SAFETY DIRECTIVES AND STANDARDS
• UL1741
Inverters, Converters, Controllers and Interconnection System Equipment for
Use With Distributed Energy Resources (2010)
◦ IEEE 1547
Standard for Interconnecting Distributed Resource with Electric Power
Systems
◦ IEEE 1547.1
Standard for Conformance Test Procedures for Equipment Interconnecting
Distributed Resources with Electric Power Systems
• FCC Part 15 Class B conducted emissions
• National Electrical Code
Can be installed in compliance with National Electrical Code 2008 and 2011
Editions Article 690 Solar Photovoltaic Systems
UTILITY INTERCONNECTION
• Voltage and Frequency Variation
IEEE 1547.1 —Automatic disconnection device between a generator and the
public low-voltage grid
• Prevention of Islanding — IEEE 1547.1 Standard for Conformance Test
Procedures for Equipment Interconnecting Distributed Resources with Electric
Power Systems was used for the test method; Automatic disconnection device
between a generator and the public low-voltage grid was used for timing
requirements
Advanced Energy® AE 3TL Inverters
570-1003552-05A Safety and Product Compliance Guidelines 1‑5