TM
10
3.3
IMPORTANT
Failure to follow these instructions
Be sure to read directions on operating
the spring valves and twist valves located in the section
“Understanding your valves”
. Before
ak seating area,
place.
1.
2.
There should be just a few wrinkles visible on the side GRAY TUBE COVERS.
3.
4.
5.
6. Make sure all valves are closed tightly and properly.
NOTE:
Ideally you want to put about half of the air in Chamber 1 and half into chamber 2. This
way if you were to loose pressure in one chamber then you would have the other chamber to
Inflate chamber 2 “main2” until the kayak feels firm to the touch
(2.0 psi max)
.
