www.advancedco.com
43
3.3.11 View Options
The View Menu Options are identical to those available during Level-2 operation.
For further information on the View Options and the information that is presented, refer to the User Manual
(Document No. 680-015).
3.3.12 Passwords
The panel provides up to 10 User Level-2 passwords and 2 Level-3 passwords. All of the passwords
9
can be
changed.
On entry to the function, the display shows a list of the passwords. For example:
Password Access level User ID
15633
2 01
9988 2 02
13344 2 03
10000 2 04
10000 2 05
To change a password, use the
buttons to highlight the required password and then enter the new
password using the
number
buttons. When the password is correct, press the
✔
button to confirm.
Level-3 Passwords.
Care should be taken when changing the Level-3 password. If this new number is lost, it is not
possible to enter commission mode functions.
Refer to
The factory default level 3 password is
7654
3.3.13 Panel
The Panel Menu Option shows a list of the internal panel circuits and provides a means to change their default
configuration settings.
Only use this menu if changes are to be made to the default settings for the panel’s internal circuits. Use the
VIEW-PANEL Menu Option to view the state and operating condition of each circuit.
The display shows for example:
More>
Address State Type Value
>001.0 Normal VOLTAGE 5.6V
001.1 Normal VOLTAGE 5.6V
002.0 Normal CURRENT 0mA
002.1 Normal CURRENT 0mA
Use the
buttons to scroll through the circuits. Use the
buttons to view additional information. The zone
and Output Group Assignments can be modified if required.
For further information on the View
– Panel Options and the information that is presented, refer to the User
Manual (Document No. 680-015).
3.3.13.1 AC Fail Delay
The panel can be configured to delay the reporting of a loss of AC Mains supply (Address 14.0).
The front panel Green Power LED will still immediately flash on the loss of the AC Supply, but the fault condition
is only reported after the delay time (default 10s) has elapsed.
9
The passwords can be further qualified using the PC CONFIG TOOL to provide permission / restriction to specific menu options. See User
Manual 680-015 and PC CONFIG TOOL Manual for further details.
