4
2.0 GENERAL OPERATION
WRITING WITH THE KEYPAD
1. Clear display by pressing ‘R’ with no transponder in
the key reader.
2. Insert the key/transponder to be written into the key reader.
3. Select required transponder type by pressing the ‘W’
button then press ‘ENTER’ to confirm.
4. Type in the required code - press the ‘W’
button to move the curser to the right and the ‘R’
button to move the curser to the left.
5. Press ‘ENTER’ then press ‘W’.
6. Select the required transponder by pressing the relevant number on the AD90.
7. If ’WRITE ERROR’ is displayed check the transponder
type and try again.
12223344556677788
1-TEXAS 3-ESC
12223344556677788
WRITE
12223344556677788
1-PH 2-T5 3-ESC
12223344556677788
VERIFY
12223344556677788
SUCCESS
12223344556677788
WRITE ERROR
TYP:11 2-CHANGE
3-ESC 4-OK
00000000000000000
00000000000000000
TYP:
www.OBD2express.co.uk
