MID connection and
use of the push-buttonsI
MIDI cable
The MIDI OUT plug of OP128 must be connected to MIDI IN of the device to be
controlled through a MIDI cable (5 poles DIN): it is advisable to use specific and qualified
cables for MIDI.
The use of cheap or damaged cables could cause serious unexpected
problems...expecially during a live show!!! Alternatively it can be used the phantom
power cable MC7 (DIN 7 pole MIDI CABLE).
How to recall the numbers
The 128 program locations can be recalled in the following way:
Push on +10 or -10 to prepare the bank where you like to operate. Then, push one of the
buttons from 0 to 9 and confirm the data: only during confirmation the program can be
changed.
0
1
2
3
4
6
7
8
9
5
MIDI PROGRAM
Advance
TUBE TECHNOLOGY
R
10
+
10
-
MIDI CONTROLLER
OP128
Summary of Contents for OP128
Page 1: ...Advance TUBE TECHNOLOGY R INSTRUCTIONS MANUAL ver 3 0...
Page 2: ......
