WARRANTY
COMPONENT LIST
Component
Reference
3 kw immersion heater (high temp)
AA 0005
Control thermostat for above (high temp)
AA 0007
High limit thermostat for above
AA 0006
Blending valve
AA 0002
Expansion vessel 2 litre
AA 0001
Float switch and motorised valve kit
AA 0300
Only use authorised replacement components.
TECHNICAL DATA
Warranty is for ten years on the tank against failure due to manufacturing fault,
and two years on components supplied and fitted to the heating manifold and
thermal store.
DISPOSAL
At the end of the life of the product please dispose of in line with any
regulations ruling at the time
Conditions apply, the unit must be serviced annually and a record of service
must be maintained. It must be in a frost free environment and must be used
for public mains potable water only. It must be installed and used correctly
in accordance with manufacturer’s requirements and current best practice.
Corrosion and scale are not covered. Chlorine/chloride levels must be below
200ppm. The store must be inhibited to correct dose.
Your
Scale is not covered
statutory rights are not affected by the above.
CAPACITY
HEAT LOSS : 56 WATTS
CLASS : D
OFF PEAK USE
WEIGHT
IMM
FULL Kg
HEATERS
HGT X
DIA
160 ltrs
230
2 x 3Kw
585 x 1450
HOT WATER
COIL M
2
1.5m
HW COIL
OUTPUT
35 Kw
947219 ADVANCE APPLIANCES 8pp A5_Layout 1 10/11/2015 14:41 Page 6