9435 Winnetka Avenue North
Brooklyn Park, MN 55445
www.advance-us.com
Phone 800-850-5559
Fax 800-989-6566
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk-advance.ca
Phone 800-668-8400
Fax 800-263-5111
ATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
The machine
doesn’t work
as it should?
The suction
doesn’t work
as it should?
The machine
doesn’t clean
as it should?
The brush
doesn’t work
as it should?
TROUBLESHOOTING
SC2000
™
1.
Check if the power cord is correctly
connected and check if the battery
is charged.
1.
Check if the suction hose is
correctly installed and cleaned.
1.
Check if you have the right
detergent and water settings.
3.
Check if the green switch Led of
the One-Touch button is flashing.
Wait until the light is steady.
2.
Restart the machine without
pressing the drive pedal.
2.
Open the recovery tank and check
that the debris tray and float are
clean and working.
2.
Check if the solution valve is open.
2.
Check if the brush is correctly
installed and not worn out or
if there are external materials
preventing brush rotation.
3.
Check that floor inclination is not
exceeding specifications.
3.
Check if squeegee blades are
damaged or dirty.
3.
Check to see if the solution filter
is clean.
1.
Check if there’s a brush motor
overload “WARNING ALARM F2”
on the display.
4.
Check if the electromagnetic brake
is locking.
4.
Check to see if the lid gasket is in
good and working condition and
sealing when the lid is closed.
4.
Check to make sure the EcoFlex
™
System is clean. Eventually purge
the system.
