Compatibility Test
Correct installation of a reserve must essentially be tested
by a trial release. Put the harness on, close the 2-buckle
and closure remember systems, and the speedbag, then
clip yourself and the IMPRESS 4 carabiners into a harness
hanger. Then pull out the reserve as if in flight.
Info:
A successful compatibility test carried out by
a pilot can greatly encourage confidence in the re-
serve system.
Operation of the reserve handle must take place in a nor-
mal flying position, and work without hindrance, in accor-
dance with the requirements of this manual. You therefo-
re must be sitting in the harness. If you are not sure of this
procedure you should contact a qualified person or your
ADVANCE dealer.
Here are some factors that could make a reserve
deployment difficult or impossible:
§
Reserve too big for the compartment or inner container.
§
Reserve not packed to the dimensions of the inner
container.
§
Reserve not pulled out with the correct technique.
A pull then throw to the side is correct.
§
The volume of the reserve worked originally in the new
harness, but after a repack it has become too big.
§
Pilot dimensions and arm length may have a significant
effect on reserve-throwing success. Small pilots with
short arms can have difficulties.
§
Conditions such as high G-loading (3G +, as in spiral
dive).
Caution:
A combination of these factors could ma-
ke a reserve deployment impossible.
Preparing the product
22 | ADVANCE IMPRESS 4
