7.5. Overstress
When using the product there is always the risk of unpredictable overstress in flight, for example caused by flying
conditions or a surprise bump in the air. In rare cases the product could suffer damage. This is especially
disappointing in that, usually, neither the manufacturer nor the pilot can be held responsible. Light products tend to
be more susceptible to damage due to overstress.
Info
In the event of damage, please contact your dealer and they will contact us. We strive to
be accommodating in such cases and work together to find the best possible solution. This
is individual and depends on the assessment of each case.
7.6. Repairs harness
You should never carry out harness repairs yourself. The various seams are prepared with the greatest precision.
Only the manufacturer or an authorised Service Centre should carry out repairs with original materials.
7.7. Removing & replacing components
General
The AXESS 5 is delivered with a built-in main protector, SAS-TEC elements, seatboard and acceleration system. All
individual parts can be easily removed, e.g. to carry out any repairs or to replace them.
1. SAS-TEC Back protection
First open the reserve V-connection channel at the shoulders, then open the rear zipper facing the back pocket.
2. Main protector
Access via zipper at the bottom of the back compartment.
31 / 34
