background image

ENGLISH

INSTRUCTIONS FOR USE

8

SW5500 - 1467287000

09/2016

MACHINE DESCRIPTION

MACHINE STRUCTURE

1.  Steering wheel

2.  Control panel (see the following paragraph)

3.  Driver’s seat with safety microswitch

4.  Seat position adjusting lever

5.  Accelerator pedal

6.  Service brake pedal

7.  Parking brake lever: press both the service brake (6) and the lever (7) to switch from the service brake to the parking brake

8.  Front skirt lifting pedal

9.  Main broom height adjusting knob:

• 

Turn it counter-clockwise to increase the broom pressure on the floor

• 

Turn it clockwise to decrease the broom pressure on the floor

10.  Vacuum system rear hood

11.  Vacuum system hood release lever

12.  Hopper (empty it when it is full)

13.  Right door (to be opened for performing maintenance procedures only)

14.  Left door (for main broom removal)

15.  Right side broom

16.  Left side broom (optional)

17.  Side broom guards (optional)

18.  Main broom

19.  Engine compartment hood

20.  Can holder

21.  Rear wheels

22.  Front driving and steering wheel

23. 

Dust filter container / Dust guard system water tank (optional)

24. 

Panel filter

25. 

Dust guard system water filler neck plug (optional)

26.  Dust guard system nozzles (optional)

27.  Front column

28.  Working lights

29.  Flashing light (always on when the ignition key is turned to “I”)

30. 

Serial number/technical data/conformity certification plate

31.  Removable right side panel

32.  Removable left side panel

33.  Anchoring slots for transport (not for lifting)

34.  LPG cylinder

35.  LPG tank fastening band

36.  Engine off push-button (optional, only for hybrid version)

Summary of Contents for 9084417010











































Reviews: