16
User’s Guide
User Functions / Messages
Key Name and Function
Power LED:
Lights up to indicate the power is turned ON.
Standby Power Button:
To power ON or OFF the monitor.
Rotary switch (Turn right or left):
With the OSD menu activated, increases or
decrease the value of the selected parameter. With the OSD deactivated, activates
the video source selection menu.
PCoIP button (Push)
: Turn ON client mode (Green LED ON) or to disconnect with
server (Green LED Blinking).
PCoIP button (Push and Hold):
Turn OFF client mode (LED OFF)
PIP Switch (Push):
To Enter PIP function or change to POP/PBP Mode.
PIP Switch (Push and Hold):
Exit the PIP/POP/PBP Mode.
Adjust Switch*:
To activate or deactivate image adjustment in sub screen of PIP,
PBP,POP mode.
Input Switch:
To change the video source.
Power Switch:
To turn ON or OFF the system.
How to access the menu.
1. Push the “Knob” button to activate the OSD menu.
2. Able to turn left or right the button to select those icons. The icon will be
highlighted when is selected.
3. Push the “knob” button to go into the another OSD menu.
4. Turn left or right “Knob” button to increase or decrease the number of selected
function.
5. In order to exit from the OSD menu in a different layer, then choose the “Exit
option”. In case of long pushing and holding the button around two or three
seconds, then it will completely out from the menu regardless wherever you are.
6. Turn the “Knob” button in a fast way to the left or right, while the menu is not
activated, then input signal menu will turns up with “V” mark which is chosen
current available input signal. You can switch to another input signal source by
turning the knob slowly then select the target source by pushing the knob.
Standby Power Button
Power Switch