Chapter 5 Installing Shelves
Installation and Commissioning Manual
181
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
Fitting the 40CSM/2HU Shelf with 19-inch Brackets
This subsection describes the procedure that must be followed in order to fit the
40CSM/2HU shelf with 19-inch brackets. 19-inch brackets are required to adapt
the 40CSM/2HU shelf to the 19-inch standard rack dimensions.
It is assumed that you are familiar with ESD-prevention precautions that should
be taken to avoid ESD damage to the equipment.
Tools and Parts Required
•
1 x 19-inch bracket pair
•
4 x screws M5x10 for fixing the 19-inch brackets
•
Torx screwdriver TX25 (for screws M5x10)
•
ESD-preventive wrist strap or other personal earthing devices
•
Suitable grounded surface or an antistatic mat for placing the shelf
shows a 19-inch bracket.
Figure 36:
19-inch Bracket for a 40CSM/2HU Shelf
To fit a 19-inch adaptor bracket perform the following steps:
CAUTION
Only Service Personnel are allowed to perform this procedure.
Ensure that you are grounded with a wrist strap or equivalent while
mounting the brackets to a shelf which contains ESD-sensitive
devices.