Installing the SH9HU, SH7HU, SH7HU-R and 1HU Equipment Shelves
144
Installation and Commissioning Manual
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
Figure 20:
Example of Connecting an Functional Earthing Con-
ductor with a Ring Lug to a 7HU shelf
Figure 21:
Example of Connecting an Functional Earthing Con-
ductor with Two Hole Lug Terminal to a 7HU shelf
If you connect an earthing conductor with a Faston wire receptacle,
carefully slide it onto the blade connector as shown in
.
Figure 22:
Example of Connecting an Functional Earthing Con-
ductor with Faston Wire Receptacle to a 7HU shelf
End of Procedure
Repeat this procedure for each shelf to be earthed. With the earthing conductor
attached to the shelf, follow the description
Mounting an FSP 3000R7 Shelf into
Mounting an FSP 3000R7 Shelf into a Rack or Cabinet
This section describes how to mount the 9HU shelf, 7HU shelf and 1HU shelf
types to a rack or cabinet (in the following referred to as rack).
The mounting brackets secure the shelf to the rack. The mounting brackets for
the 9HU shelf and 7HU shelf have four holes, and the mounting brackets for the
1HU shelf types have two holes.