31
Illustration Aduro 5.1
*Remember to mount the set screws before the insert is placed at the correct position. The set screws are in
the ash drawer.
Surrounding aperture
The insert is constructed in a way that makes it possible to make the brickwork shut almost tight around the
insert the first 10 cm in the depth from the front. This means that the hole in the front brickwork must be 54-
55 cm high and 58.5-59 cm wide. After the first 10 cm in the depth there must be 2.5 cm air space around
the insert which gives a minimum total width of 63.5 cm. and a total depth of minimum 49 cm in the hole. It is
very important to ensure the 2.5 cm air space around the insert and that the installation is correct (see
section 2.2), otherwise the fireplace insert will not cool down sufficiently. A correct cooling is crucial for the
energy efficiency as well as for the function of the Aduro-tronic.
The front of the insert with the frame covers an area of 57.4 cm in height and 63.5 cm in width.
When making the whole in the brickwork then please also remember that you might need some extra space
when the pipe has to be mounted.
Vermiculite tiles
Flue outlet
cover
Flue deflector (steel)
Secondary damper
Setting screws*
Primary damper and
ash drawer
Roles for an easier
mounting
