ADTRAN TOTAL ACCESS 600R, System Manual

Page: 114 / 196

Section 4 User Interface Guide Total Access 600R System Manual
114 © 2002 ADTRAN, Inc. 61200600L1-1A
S
ECURITY
> R
ADIUS
S
ERVER
The parameters for the
RADIUS S
ERVER
are configured in this menu.
S
ECURITY
> R
ADIUS
S
ERVER
> S
ERVER
1
This is the IP address of the first
R
ADIUS
S
ERVER
the unit should attempt to communicate with when
authenticating a Telnet session. Default is
0.0.0.0
.
S
ECURITY
> R
ADIUS
S
ERVER
> S
ERVER
2
This is the IP address of the second
R
ADIUS
S
ERVER
the unit should attempt to communicate with when the
primary server does not respond. Default is
0.0.0.0
.
A
CTIVE
Turns this entry active when set to
Y
ES
.
Default is
N
O
.
T
YPE
Selects the filter define list to reference (default is
MAC
):
MAC from the
S
ECURITY
> F
ILTERS
> F
ILTER
D
EFINES
> MAC F
ILTER
D
EFINES
list.
P
ATTERN
from the
S
ECURITY
> F
ILTERS
> F
ILTER
D
EFINES
> P
ATTERN
F
ILTER
D
EFINES
list.
IP from the
S
ECURITY
> F
ILTERS
> F
ILTER
D
EFINES
> IP F
ILTER
D
EFINES
list.
F
ILTER
L
IST
N
AME
Selects between filters defined in the list. Default is no entry in filter list name.
N
EXT
O
PER
The next operation to use to combine with the next filter in the list (default is
E
ND
):
END
the last filter to combination.
AND
logically AND this filter with the next filter in the list.
OR
logically OR this filter with the next filter in the list.
Telnet radius is only available in A.04 firmware or later.