Total Access 3000 Hi-Cap RT Solution Installation and Maintenance Manual
4
64192MB3K2LX-1B
End Chamber
An additional door on the left side of the cabinet provides access to the End Chamber. The
End Chamber houses the following:
• AC Load Center
• 200-Pair Protector Block
• Equipment-side and field-side MS
2
splice modules
• ECC
A divider panel separates the End Chamber from the Equipment Chamber. The divider panel
has wire pass-through openings and also supports the components within the End Chamber.
Beneath the bottom panel of the End Chamber are the wire ingress cones and nozzles and two
cabinet ground bus bars. All wire ingress through the bottom panel is through sealed fittings.
Figure 2. End Chamber
Heat
Exchanger
Protector Block
1-100
Protector Block
101-200
AC Load Center
ECC
Door Not Shown
