SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
16
2. By default, the
Internet Service
is
enabled
. To
disable
the Internet feature, click the
slide button
to the right of
Enabled
.
3. Configure the tagging options:
a. In the
Tag mode
field, select the type of tagging that should be performed. Options are
Untagged
,
Tagged
, and
DQTagged
. The default is
Untagged
.
b. If
Tagged
or
DQTagged
is selected, the
VLAN
and
P-bit
fields appear. Enter the ID of the appropriate VLAN. Valid
values are
1
-
4079
. The default is
2
. Enter the P-bit type. Options are
0
-
7
. The default is
0
.
c. If
DQTagged
is selected, the
CVID
field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs that
will be accepted and mapped to the specified WAN. Valid values are
1
-
4062
. The default is
0
.
4. (
Optional
) In the
MAC Address
field, enter the MAC address that to be used with this configuration. By default, this value is
the gateway MAC address.
5. Complete the fields for
IPv4 Configuration
and
IPv6 Configuration
sections as they apply to your environment, using the
information provided below.
a. In the
Configuration method
field, select the appropriate method for your WAN.
Options for IPv4 WANs are
DHCP
,
Static Address
, and
PPPoE
. The default is
DHCP
.
Options for IPv6 WANs are
DHCPv6
,
Static Address
, and
None
. The default is
DHCPv6
.
b. Complete the remaining fields as instructed below for each option:
l
"DHCP for IPv4 WANs" (IPoE)
l
"Static Address for IPv4 WANs"
l
l
l
"Static Address for IPv6 WANs"
6. Click the
Apply
button in the
Pending changes...
dialog box to save your settings.
DHCP for IPv4 WANs
The following fields appear when
DHCP
is selected as the configuration method. This method is the default for IPv4 WANs.
1. To use a different host, enter the host name that you want to include in DHCP requests in the
Hostname
field.
2. To
disable
the default route for this WAN, click the
slide button
to the right of
Create default route
.
