INSTALLATION
The MC60 adapter is installed between the incoming coaxial wall jack
and the destination device, such as a TV or a set-top box.
Connect a coax cable to the
In
port (or similar input port) on the
destination device and to the
TV OUT
port on the MC60 adapter.
Connect a coax cable to the cable wall jack and to the
MoCA® IN
port on the MC60 adapter.
Connect the power adapter to a wall outlet and then to the
DC 5V
port on the MC60. Press the
ON/OFF
button on the MC60.
The
Power
LED light glows white. The
MoCA®
LED glows green
briefly and then blinks to white.
Turn on your TV to confirm that TV service is available. If it is not
available, verify all cables are securely connected.
To connect an Ethernet-capable device (such as an Internet-enabled
TV), connect an Ethernet cable to the device and to the
Ethernet
port
of the MC60 adapter. The Ethernet LED glows green and then blinks
green.
