Logging on to the Total Access 1248
61179641AL1-5C
5-3
LOGGING ON TO THE TOTAL ACCESS 1248
To logon to the Total Access 1248 system, perform the following steps:
1. Establish the physical connection to the Total Access 1248.
2. If a craft port session is being used, proceed to step
. If using a Telnet session proceed to
3. Press
C
TRL
+R
until the Login prompt appears.
The Login screen displays (see
Figure 5-2. Login Screen
NOTE
The Total Access 1248 system requires the username and
associated password.
4. Enter the default username, “ADMIN” (or the configured username with System Adminis-
trator privileges), and press
E
NTER
.
5. Enter the default password, “PASSWORD” (or the configured password), and press
E
NTER
.
NOTE
The username and password fields are case sensitive. The default
values are all uppercase. For more information, refer to
Total Access 1248
Login: ADMIN
Password: ********
