Total Access 1248 Quad T1 IMA 48-Port DSLAM with Modem Installation and Maintenance Practice
5-78
61179641AL1-5C
NOTE
The System Management menu TFTP IP address option must be
configured to use TFTP.
Y-Modem Menu
Y-Modem
\
\Y-Modem\
) is used to download code stored from a computer to the
Total Access 1248 through the craft port.
NOTE
To expedite the download time, change the baud rate to 38400 bps
prior to downloading code. For more information, refer to
Figure 5-49. Y-Modem Menu
To download code via the Y-Modem menu, perform the following steps:
1. Access the system with System Administrator privileges using a terminal application that
allows file transfers, such as HyperTerminal.
2. From the Y-Modem menu, select
Download Network Module Code
, and press
E
NTER
.
The Y-Modem receive utility begins.
3. If using HyperTerminal, select
Transfer
from the menu, and select
Send File
.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
WARNING! THIS IS SERVICE AFFECTING!
Y-Modem is the file transfer protocol.
This function cannot be initiated via a telnet
connection (use TFTP instead).
1. Download Network Module Code
2. Exit
Selection :
'?' - System Help Screen
