ADTRAN OPTI-6100 LMX, User Manual, Page: 26 / 48

OPTI-6100 OPTI-APPS User Guide
16 61184568G1-31C
GNE Configuration: TCP/IP – Indirect Connection
To add and configure a new GNE, and access the GNE via an Indirect TCP/IP connection,
complete the following steps:
1.
Right-click the OPTI-APPS logo in the Nav Pane, and select Add Gateway NE .
A new GNE box appears in the Nav Pane.
2.
Enter configuration data in the Config Pane (refer to Table 3 on page 11 as needed):
• GNE Name: this must be the exact Target ID (TID) of the GNE
• GNE Type: select the appropriate type (the default is ADTRAN )
• Connection Type: select TCP/IP – Indirect
• Server IP: enter the IP address of the Secure Server
• GNE IP: enter the IP address of the GNE
3.
Click Connect .
A new window appears, displaying a login prompt for the secure server ( Figure 12 ).
Figure 12. Log In to Secure Server
4.
At the Login prompt, enter an appropriate login ID for the server, and press ENTER.
5.
At the Password prompt, enter the password for the login ID entered, and press ENTER.
6.
Click Connect To GNE .
A successful telnet connection to the GNE should appear, similar to the example below:
# telnet 10.25.15.1 2001
Trying 10.25.15.1...
Connected to 10.25.15.1.
Escape character is '^]'.
7.
Click Verify TL1 Conn to confirm the IP address of the GNE is correctly entered.