Unit Installation
NetVanta 6355 PoE Hardware Installation Guide
42
Copyright © 2011 ADTRAN, Inc.
61200740E1-34D
Installing a CompactFlash Card
The CompactFlash (
CF
) slot supports only the ADTRAN-provided 1 GB CompactFlash
card. Follow
these instructions when installing a card.
Figure 18. CompactFlash Card Installation
Your NetVanta unit is now ready to be configured and connected to the network. For information on switch
configuration for a specific application, refer to the configuration guides provided on the
ADTRAN Support
Community
. For details on the command line interface (CLI), refer to the
AOS Command Reference Guide
. All
other related documents are also available online at
http://supportforums.adtran.com
.
The CompactFlash card is hot-swappable and can be inserted or removed while power is
applied to the unit.
Instructions for Installing a CompactFlash Card
Step
Action
1
Remove the two screws and the cover from the
CF
slot on the rear of the unit.
2
Slide the module into the
CF
slot until the card is firmly seated against the chassis.
3
Replace the
CF
slot cover.
4
The CompactFlash options will now be available in the GUI and the AOS CLI.
CompactF
lash