ADTRAN MX3216 System Manual Download Page 83

Page: 83 / 190

Section 6, User Interface - Menu Descriptions

61189008L1-1B

6-19

MENU DESCRIPTIONS

This section describes the individual menus and screens of the MX3216 system as follows:

•

•

NOTE

For basic provisioning, refer to the

“Quick Setup Menu”

on page 6-

57. For more detailed provisioning, refer to the

“Provisioning Menu”

on page 6-23.

MX3216 Main Menu

The MX3216 Main menu (see

Figure 6-11

) is the access point to all other operations. Each

Main menu item has several functions and submenus that identify and provide access to
specific operations and parameters.

Figure 6-11. MX3216 Main Menu

The MX3216 Main menu options are shown in

Table 6-2

Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216

MX3216

                          1 - Configuration
                          2 - Provisioning
                          3 - Quick Setup
                          4 - Status
                          5 - Test
                          6 - System Alarms

7 - Firmware Upgrade

8 - MX3RMM
Module B

9 - Logout

Selection : '?' - System Help Screen

Summary of Contents for MX3216































































































































































































Search results

Summary of Contents for MX3216

Reviews:

Brands by name

Popular brands

ADTRAN MX3216, System Manual

Search results

Summary of Contents for MX3216

Reviews:

Brands by name

Popular brands