ADTRAN MX3216, System Manual

Page: 171 / 190

Section 6, User Interface - Menu Descriptions
61189008L1-1B 6-107
Network Menu
The Network menu (see Figure 6-67 ) is used to configure the DS1 interface A and B.
Figure 6-67. Network Menu
The Network menu options are shown in Table 6-75 .
Table 6-75. Network Menu Options
Option Description Function
1 Network Interface A This option displays the “Network Interface Menu”
on page 6-108. This menu is used to configure the
DS1 interface A.
2 Network Interface B This option displays the “Network Interface Menu”
on page 6-108. This menu is used to configure the
DS1 interface B.
3 Framing Mode This option is used to set the framing mode for both
DS1 network interfaces. Options are as follows:
• ESF: This option sets the DS1 network inter-
face framing mode to Extended Super Frame.
• SF: This option sets the DS1 network interface
framing mode to Super Frame.
4 Timeslot Assignment This option is used to enter the DS0 timeslots for
the network interfaces. Both network interfaces use
the same number of DS0s. Any number of DS0s can
be assigned from one to twenty-four, but they must
be in a contiguous block.
Card: Module A ADTRAN MX3216 System MM/DD/YY hh:mm
Unacknowledged Alarms: NONE ID: Site 1 MX3216
Network
1 - Network Interface A
2 - Network Interface B
3 - Framing Mode
4 - Timeslot Assignment : 01-24
Selection : '?' - System Help Screen