manualshive.com logo in svg

ADTRAN MX3216, System Manual

Share
Download
ADTRAN MX3216 System Manual Download Page 170

MX3216 System Manual

6-106

61189008L1-1B

Table 6-74.  Provisioning Menu Options 

Option

Description

Function

1

Network

This option displays the 

“Network Menu” 

on page 6-

107. The Network menu provides provisioning 
options for the DS1 network interfaces of the 
MX3RMM.

2

Terminal Server

This option displays the 

“Terminal Server Menu” 

on 

page 6-110. The Terminal Server menu is used to 
provision the four front panel RS-232 terminal 
server ports. Each port is independently 
provisioned.

3

Ethernet Interface

This option displays the 

“Ethernet Interface Menu” 

on page 6-113. The Ethernet Interface menu is used 
to provision the front panel Ethernet interface on 
the MX3RMM.

4

Save Provisioning

This option saves the current MX3RMM 
provisioning.

5

Auto Save

This option displays the Auto Save menu that 
provides options to enable or disable the periodic 
storage of all provisioning settings. Options are as 
follows:

• Enabled
• Disabled

6

Restore Saved Provisioning

This option is used to restore the previously saved 
provisioning settings.

7

Restore Factory Defaults

This option is used to restore the factory default 
provisioning settings.

8

Card Reset

This option is used to reset the MX3RMM.

Summary of Contents for MX3216































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands