ADTRAN IP 700 Series Phones Release Notes 2.3.0
Upgrade Instructions
Copyright © 2012 ADTRAN, Inc.
6
Upgrade Instructions
Upgrading ADTRAN IP 700 Series phones to the latest version of firmware is explained in detail in the
configuration guide
Upgrading IP 700 Series Phones Firmware
(ADTRAN’s Knowledge Base article
3551), available at
http://kb.adtran.com
. Firmware upgrades are available on the
Support/Software
Downloads
section of ADTRAN’s website at
http://www.adtran.com
.
Documentation Updates
The following documents were updated or newly released for Firmware version 2.3.0 specifically for the
ADTRAN IP 700 Series phones.
• Upgrading IP 700 Series Phone Firmware Configuration Guide (61200770E1-29A, article 3551)
• IP 700 Series Phone User Manual (6AOSUG0001-1A, article 3568)
• IP 700 Series Phone Administrator Guide (6AOSAG0001-31A, article 3567)
• When an SLA call is retrieved from public hold, the line key label changes to the registration user for
that line.
• When a call is answered, a second incoming call is ignored, and then the first call is put on hold to
answer a third subsequent call, the line key for the first call does not show the on hold icon.
• After ignoring two subsequent incoming calls while on a call, the soft keys displayed are
Dial,
Redial,
Pickup,
and
More.
Soft keys while on an active call should display
Hold,
Park,
and
Endcall
.
• When syslog is enabled for verbose debugging, the phone may lockup when using click-to-dial from
NetVanta 7100 Personal Phone Manager or NetVanta ucCompanion.
• If the IP phone receives a 302 Moved Temporarily response to change the destination of an outbound
call, the line key label will display Unknown instead of the new destination.
• If a call is active and a subsequent call is sent to voicemail, the
Endcall
soft key will no longer be
available. Users can use the Goodbye hard key to end the current call. Subsequent calls will display the
Endcall
soft key as expected.
• If ending a call when another call is incoming, the IP phone rings at maximum ringer volume for that
inbound call.
• When an apostrophe is present in a directory field (such as Bob's, Doctor's, etc.), the Personal Directory
contents are truncated following the apostrophe.
• When dialing an extension by pressing the
Status Group BLF key for that extension, the call is not
recorded in the Placed Calls list.
• When receiving a call, if the phone rings for 60 seconds, it will send a
486 Busy Here
message back to
the SIP server.