ADTRAN Express XL, User Manual

Page: 85 / 187

Chapter 3: Terminal Menu Operation and Structure
61200070L1-1 Express XL/XLT User Manual 69
IP/RIP
The RIP parameters can be adjusted from their defaults under this menu. The
RIP parameters for all WAN connections are set on a per-session basis.
RIP/Mode
Write security: 3; Read security: 5
The Express XL/XLT will perform RIP over the WAN connection when this is
set to
On (def).
RIP/Protocol
Write security: 3; Read security: 5
The Express XL/XLT can perform version 1,
V1 (def), or version 2, V2 , of RIP
on this WAN connection.
RIP/Method
Write security: 3; Read security: 5
Split Horizon - Only routes not learned on the WAN connection
are advertised.
Poison Reverse (def) - All routes are advertised, including routes
learned from the WAN connection. These routes are poisoned.
None - All routes are advertised, including routes learned from
the WAN connection. No attempt is made to poison these routes.
RIP/Direction
Write security: 3; Read security: 5
Tx and Rx (def)- RIP advertisements are transmitted and listened
to on the WAN connection.
Tx only - RIP advertisements are transmitted and not listened to.
Rx only - RIP advertisements are listened to but not transmitted.
RIP/Triggered
Write security: 3; Read security: 5
When set to
Yes , only IP RIP updates are sent when the routing table has
changed and learned routes are not “aged.” When set to No (def), updates are
sent periodically.